Valves are used for a variety of purposes, on the basis of their configurations and sizes, and they’re an integral part of the seamless operation of any system.
When dealing with this industry for the first time, these options can be overwhelming but worry not, in this article, we’ll discuss angle valves. Once you read this article, you’ll understand if they serve a purpose in your system and how you can implement them.
What are angle valves?
Angle valves are plumbing valves that help control the flow of water from a pipe or line. You can install them on the wall, on the floor, or in a cabinet.
Angle valves are also known as 90-degree stop valves. You can adjust them at a 90-degree angle to curb the water flow. You can also use them for emergency water shut-off, to take immediate action and shut down the entire supply.
Design
The design of an angle valve is determined by its purpose and the type of material it is made from. It generally consists of two ports, one inlet, and one outlet, connected at an angle.
The inlet and outlet ports are usually threaded for easy connection to pipes. Inside the valve, there is a gate or plug which is operated by a handle or lever. This gate or plug moves up and down to open or close the valve and regulate the flow of the liquid or gas.
The design of the gate or plug is determined by the type of material it is made from and the pressure it will be exposed to. Angle valves are typically made of brass or stainless steel but may also be made of other materials such as plastic or chrome-plated brass.
Depending on the application, the most suitable material for an angle valve will vary. For instance, brass is a good choice for hot water applications due to its corrosion resistance, while stainless steel is better for pressurized systems. Plastic is ideal for applications where you use corrosive chemicals or extreme temperatures.
Signs you should replace the valve.
- Leaks: If you find water leaks in the angle valve, you need to replace it.
- Noisy valve: If you hear a hissing or rattling sound from the valve, it’s a sign the valve is worn out and needs to be replaced.
- Difficulty turning: If you find it difficult to turn the handle on the angle valve, it may be time to replace it.
- Corrosion: If the metal components of the angle valve look corroded or rusty, it’s a sign that the valve needs to be replaced.
Applications of angle valves
Angle valves are used in a wide variety of residential and commercial applications.
They are often used to regulate the flow of water in a plumbing system. They can also be used in irrigation systems, to regulate the flow of water to sprinklers or drip systems. In industrial applications, angle valves control the flow of liquids, gases, and steam.
Obaid Masood is the leading expert in angle valves, offering the best quality and selection to meet your needs. Our knowledgeable staff is always ready to assist you in finding the right angle valve for your project.